Cable Holder for Series 20, 30, 40 and 45 Aluminium Profiles

The universal cable tie mounting block is a practical accessory designed to organise, route and secure cables on structural aluminium profiles. It helps keep electrical, signal and pneumatic installations tidy, reduces tangled and freely hanging cables, and improves the appearance and safety of the complete structure.

Once the holder has been installed in the profile slot, cables are secured to it using appropriately selected cable ties. This allows the wiring to be routed close to the profile surface and held in the required position without drilling additional holes in the structure.

The holder is compatible with aluminium profiles from Series 20, 30, 40 and 45. The screw and T-slot nut must be selected according to the slot width and geometry of the chosen profile series. Because the holder is mounted in the slot, its position can be changed when the structure is expanded or modified.

The product is manufactured from glass-fibre-reinforced PA6. This material provides a rigid and durable component suitable for technical, industrial and workshop applications. The black colour complements both black and natural aluminium profiles.

Key Features of the Cable Holder

• Type: cable holder / cable tie mounting block
• Product number: Cableblock
• Material: glass-fibre-reinforced PA6
• Colour: black
• Weight: 0.0145 kg
• Compatible profile series: Series 20, Series 30, Series 40 and Series 45
• Compatible slot widths: 6 mm, 8 mm and 10 mm
• Mounting method: directly in the aluminium profile slot
• Number of mounting points: 1
• Thread size: M5
• Cable attachment: using cable ties
• Position adjustment: adjustable along the profile slot
• Application: routing cables, wires and flexible hoses
• Benefits: organised installation, quick mounting and convenient access to wiring

Installing the Cable Holder on an Aluminium Profile

The holder is mounted directly in the slot of a structural aluminium profile. First, place the correct T-slot nut in the profile slot. Then position the holder in the required location and secure it using a compatible M5 screw.

Once the holder has been installed, route the cables along the structure and secure them with a cable tie. Tighten the cable tie enough to hold the cables in place, but avoid excessive compression or deformation.

The screw length and type of T-slot nut depend on the selected profile series. Using the correct mounting set provides a stable attachment and reduces the risk of the holder rotating or moving during use.

Mounting on Series 20 Aluminium Profiles

For Series 20 aluminium profiles with a 6 mm T-slot or V-slot, we recommend:

• 1× ISO 7380-M5x8
• 1× 6-4-M5

Mounting on Series 30 Aluminium Profiles

For Series 30 aluminium profiles with an 8 mm T-slot, we recommend:

• 1× ISO 7380-M5x10
• 1× 8-4-M5.30

Mounting on Series 40 Aluminium Profiles

For Series 40 aluminium profiles with an 8 mm T-slot, we recommend:

• 1× ISO 7380-M5x12
• 1× 8-4-M5.40

Mounting on Series 45 Aluminium Profiles

For Series 45 aluminium profiles with a 10 mm T-slot, we recommend:

• 1× ISO 7380-M5x16
• 1× 10-4-M5.45

The ball-loaded T-slot nuts remain in position inside the profile slot, making it easier to position and fasten the holder in the required location. The holder can later be repositioned by loosening the screw and sliding it along the slot.

Cable Management on Aluminium Profiles

The cable holder for aluminium profiles helps route cables parallel to the structural frame and keeps them away from moving, hot or sharp components. Organised wiring makes maintenance, fault diagnosis and future expansion of a workstation or machine easier.

The holder can be used to organise:

• power cables,
• signal and control cables,
• USB, HDMI and DisplayPort cables,
• sensor and encoder cables,
• motor and drive cables,
• flexible pneumatic hoses,
• wiring for Sim Racing cockpits and gaming setups.

The number of cables routed through a single holder should be selected according to their diameter, flexibility and the size of the cable tie. Cables should be arranged without sharp bends and with sufficient extra length for safe connection.

Benefits of the Cable Holder for Aluminium Profiles

• provides clean cable routing along aluminium profiles,
• is compatible with Series 20, 30, 40 and 45 profiles,
• can be used with T-slot and V-slot profiles,
• allows cables to be secured using widely available cable ties,
• reduces tangled and freely hanging cables,
• helps protect cables from accidental snagging or pulling,
• improves organisation in electrical and pneumatic installations,
• can be installed without drilling additional holes in the profile,
• allows the holder position to be adjusted along the slot,
• is manufactured from glass-fibre-reinforced PA6,
• complements black and silver aluminium profiles,
• is suitable for industrial, workshop, gaming and DIY applications.

The universal black cable holder for Series 20, 30, 40 and 45 aluminium profiles is a practical solution for users looking for simple installation, effective cable management and a clean, professional structural finish.